Beats Fit Pro vs Anker soundcore AeroFit 2 Pro

Every spec side by side, from each maker's published figures.

Better figure, where one is clearly better

Fit Pro compared with AeroFit 2 Pro
BeatsFit ProAnker soundcoreAeroFit 2 Pro
Overview
ReleasedNovember 2021January 2026
Sound
TypeIn-earOpen-ear
Noise cancellingYesYes
Transparency modeYes–
Spatial audio with head trackingYesYes
Driver size–11.8 mm
Bluetooth codecsSBC and AACSBC, AAC and LDAC
ChipApple H1–
DriversDual-element diaphragm driver in a two-chamber housing; Apple does not publish its diameter11.8 mm composite drivers
Noise cancelling detailAdaptive Active Noise Cancelling and Transparency modeAdaptive ANC 3.0 operates in the Focus form at ear-hook positions 4 and 5. Open-ear Awareness form uses positions 1 and 2; noise cancellation and fit depend on ear shape.
Audio featuresSpatial audio with dynamic head tracking; Bluetooth 5.0 and SBC/AAC codecs (SoundGuys)HearID custom EQ and app EQ presets; spatial audio with head tracking. LDAC requires a compatible Android source.
Battery
Listening time (maker's claim)Up to 6 hoursUp to 5 hours
With the caseUp to 24 hoursUp to 24 hours
Wireless chargingNoYes
Battery life detailUp to 7 hours with noise cancelling and Transparency off; up to 6 hours with either onMaker FAQ at 50% volume: up to 5 hours with ANC and 24 hours including case, or 7 hours in open-ear form and 34 hours including case. With LDAC, about 3 hours with ANC or 6 hours open-ear. Calls at 60% volume: about 4 hours in either form. Main figures use ANC on.
Charging caseUSB-C; no wireless charging (SoundGuys and TechRadar)USB-C and Qi wireless charging. Each earbud: 60 mAh, about one hour to charge. Case: 750 mAh, about two hours wired or four hours wirelessly; wireless charging maximum 3 W (maker FAQ).
Fast chargingA 5-minute Fast Fuel charge gives up to 1 hour of playbackTen minutes charging earbuds provides up to 3.5 hours playback; no fast-charging claim for the case.
Design
Weight (each earbud)5.6 g (better)10.4 g
Water and sweat resistanceIPX4IP55
Bluetooth5.06.1
Two devices at once–Yes
ControlsMulti-function button on each earbud; playback, calls and configurable press-and-hold controlsCustomisable physical button controls and case pairing/reset button. No wearing detection.
MicrophonesDual beamforming microphones and voice-detection accelerometerFour microphones with AI call-noise reduction
Fit and ear tipsFlexible wing tips, pressure-relieving vents and silicone ear tips in three sizes; ear tip fit test on Apple devices and in the Beats Android appFive adjustable ear-hook positions. Maker specifies the ANC form for an ear bowl wider than 16 mm; an ear bowl of 16 mm or less may not support ANC form and should use open-ear form. Each earbud weighs 10.4 g (UK maker).
Case weight55.1 g88.2 g (UK maker)
DimensionsEarbud 3 × 2.4 × 1.9 cm; case 6.2 × 6.2 × 2.85 cm–
Water resistance detailIPX4 for the earbudsIP55 applies to earbuds; maker FAQ states the charging case is not water-resistant. Not for swimming or diving.
Works withClass 1 Bluetooth; Apple H1 enables automatic switching and Audio Sharing; Android app supports pairing, controls, battery levels, updates and the fit testsoundcore app, two-device connection and single-earbud use. Current AI Translation requires app 3.8.7 or later and a network connection. LDAC is not available on iOS.
ColoursBlack, White, Sage Gray, Stone Purple at launch (MacRumors)Black, Purple, White and Blue on the current UK maker page.
In the boxEarbuds, charging case, three sizes of ear tips, USB-C to USB-C cable, Quick Start Guide and warranty card; power adapter sold separately–

More comparisons