Canon RF 20mm F1.4 L VCM vs Canon RF 35mm F1.4 L VCM

Every spec side by side, from each maker's published figures.

Better figure, where one is clearly better

RF 20mm F1.4 L VCM compared with RF 35mm F1.4 L VCM
CanonRF 20mm F1.4 L VCMCanonRF 35mm F1.4 L VCM
Overview
ReleasedApril 2025July 2024
Optics
Lens typePrimePrime
Focal length20 mm35 mm
Maximum aperturef/1.4f/1.4
Minimum aperturef/16f/16
Optical constructionFifteen elements in eleven groupsFourteen elements in eleven groups
Special elementsOne Super UD, two UD, one BR and two glass-moulded aspherical elements; ASC, SWC and Super Spectra coatings; front fluorine coatingTwo UD and two glass-moulded aspherical elements; ASC and Super Spectra coatings; front fluorine coating
DiaphragmEleven blades with circular apertureEleven blades with circular aperture
Mount and compatibility
MountsCanon RFCanon RF
Image circleFull frameFull frame
CompatibilityCanon RF mount for full-frame and APS-C EOS R cameras; RF extenders not compatible. Iris ring provides movie aperture control; Canon lists EOS R, RP, Ra, R3, R5, R6, R6 Mark II, R7, R8, R10, R50, R100 and R5 C as unable to set still-photo aperture with this ring even with their latest firmwareCanon RF mount for full-frame and APS-C EOS R cameras; RF extenders not compatible. Canon's specification footnote says the iris ring cannot control still-photo aperture on EOS R cameras released before May 2024, and warns that iris-ring operation during movie autofocus can occasionally cause inconsistent focus and aperture on those cameras
Focus and stabilisation
AutofocusYesYes
Minimum focus distance0.2 m0.28 m
Maximum magnification0.19×0.18×
Optical stabilisationNoNo
Autofocus detailRear focusing system driven by a VCM motorElectronic floating focus control combines VCM and Nano USM motors
Focus distance detailMinimum focus 0.2 mMinimum focus 0.28 m
Magnification detailMaximum 0.19×Maximum 0.18×
Stabilisation detailNo optical stabiliser; Canon rates EOS R1 in-body stabilisation at 8 stops centrally and 5 stops in the corners under CIPA-2024 testingNo optical stabiliser; in-body stabilisation depends on the camera
Design
Dust and moisture resistantYesYes
Filter diameter67 mm67 mm
Maximum diameter76.5 mm76.5 mm
Length99.3 mm99.3 mm
Weight519 g (better)555 g
ControlsElectronic manual-focus, customisable control and smooth-action iris rings; iris Auto-position lock; customisable lens function button; AF/MF switchElectronic manual-focus, customisable control and smooth-action iris rings; iris Auto-position lock; customisable lens function button; AF/MF switch
Filter detail67 mm front thread and rear filter holder; Canon specifies a single rear filter no thicker than 0.2 mm and recommends removing the holder when unused to avoid possible ghosting–
Weather resistanceDust and moisture resistant construction with mount rubber sealDust and moisture resistant construction with mount rubber seal
Dimensions detailApproximately 76.5 mm maximum diameter × 99.3 mm lengthApproximately 76.5 mm maximum diameter × 99.3 mm length
Weight detailApproximately 519 g lensApproximately 555 g lens
Lens hoodEW-73H hood includedEW-73F hood included
In the boxLens, E-67 II front cap, RF dust cap, EW-73H hood, LP1219 case, rear filter holder and user manualLens, E-67 II front cap, RF dust cap, EW-73F hood, LP1219 case, rear filter holder and user manual
Release detailApril 2025 marketed month in Canon Camera MuseumJuly 2024 marketed month in Canon Camera Museum

More comparisons