Klipsch Flexus Core 200 vs Marshall Heston 60

Every spec side by side, from each maker's published figures.

Better figure, where one is clearly better

Flexus Core 200 compared with Heston 60
KlipschFlexus Core 200MarshallHeston 60
Overview
ReleasedApril 20242025
Sound
TypeSoundbarSoundbar
Channels3.1.25.1
Dolby AtmosYesYes
DriversFour 2.25 in aluminium front drivers, a 0.75 in horn-loaded centre tweeter, two 4 in paper bass woofers and two 2.25 in discrete upward-firing full-range height driversFive 1.25-inch full-range drivers and two 3-inch woofers; virtual height effects, with no up-firing drivers (Expert Reviews)
Amplifiers185 W RMS system power; powered by OnkyoSeven Class D amplifiers, listed as 2 × 25 W and 5 × 5 W; separately stated total output 56 W peak. These are different maker ratings, not additive system power.
Frequency response43 Hz–20 kHz; maximum acoustic output 99.8 dB (maker)45 Hz–20 kHz; maximum SPL 89 dB
Audio formatsDolby Atmos; Dolby Digital via optical; DTS unsupported (AVForums)Dolby Atmos and DTS:X
Room tuningMovie and Music modes, equaliser, night mode and dialogue boost; no automatic room calibration (AVForums)Automatic calibration; Music, Movie, Night and Voice modes
Connections
Wi-FiNoYes
BluetoothYesYes
AirPlayNoYes
HDMI eARCYesYes
Voice assistantsNoneNone
Wi-Fi–Wi-Fi 6
BluetoothBluetooth streaming; Bluetooth 5.2 reported by What Hi-FiBluetooth 5.3 with SBC, AAC and LC3; Auracast supported
PortsHDMI eARC, optical, USB-C, USB-A Flexus transmitter port and RCA subwoofer output. Current manual supports MP3/WAV playback from FAT32 USB drives; specification sheet limits its USB-A playback description to MP3 test/debug use.HDMI eARC, 3.5 mm analogue input, mono RCA subwoofer output and USB-C; no HDMI passthrough
Streaming–AirPlay 2, Google Cast, Spotify Connect, TIDAL Connect and airable radio
Multi-roomExpandable with up to two Flexus wireless subwoofers and two surrounds; current manual lists Sub 100/Sub 200 and Surr 100/Surr 200. No Wi-Fi network streaming.Optional Heston Sub 200 sold separately
AppKlipsch Connect Plus for virtual remote, equaliser, channel controls and supportMarshall app
Design
Weight8.5 kg2.76 kg (better)
ControlsTop power, source and volume buttons; backlit BLE remote with sound mode, dialogue, night and brightness controlsPhysical buttons and programmable preset; magnetic logo and reversible control panel for wall mounting. No dedicated remote supplied.
Microphones–Two calibration microphones; no built-in voice assistant
Mounting1/4 in–20 thread and supplied wall brackets; wall fasteners not includedWall-mount grommets included
Size78 × 1118 × 126 mm, H × W × D; 8.5 kg is soundbar-only weight730 × 68 × 124 mm (width × height × depth)
ColoursEbony vinyl; Walnut variant shown on the current UK product pageBlack or Cream
In the boxSoundbar, remote, two AAA batteries, 2 m region-specific power cord, 1.5 m HDMI cable, mounting brackets and hardware, manual; separate subwoofers and surrounds optionalSoundbar, two wall-mount grommets, logo and control panel, mains lead, HDMI cable and guides

More comparisons