Audio-Technica ATH-M40x vs beyerdynamic DT 1770 PRO

Every spec side by side, from each maker's published figures.

Better figure, where one is clearly better

ATH-M40x compared with DT 1770 PRO
Audio-TechnicaATH-M40xbeyerdynamicDT 1770 PRO
Overview
ReleasedFebruary 2014September 2015
Sound
TypeOver-earOver-ear
Noise cancellingNoNo
Driver size40 mm45 mm
BackClosedClosed
Impedance35 ohms250 ohms
Bluetooth codecsNone (wired)None (wired)
DriversDynamic, 40 mm with neodymium magnets and copper-clad aluminium wire voice coils; tuned flat; 15 – 24,000 Hz; sensitivity 98 dB; maximum input power 1,600 mW at 1 kHz45 mm Tesla dynamic drivers, closed; 5 – 40,000 Hz; 102 dB SPL (1 mW, 500 Hz); max. 125 dB SPL (200 mW, 500 Hz); THD < 0.05% (1 mW, 500 Hz); rated power handling 200 mW
Noise cancelling detail–No active noise cancelling; passive attenuation approx. 18 dBA with velour ear pads, approx. 21 dBA with leatherette
Battery
Listening time (maker's claim)No battery (wired)No battery (wired)
Design
Weight240 g (better)388 g
Headphone cableYesYes
Fit and ear tipsCircumaural, closed-back; earcups swivel 90 degrees; collapsibleCircumaural, closed-back; nominal headband pressure approx. 7.2 N; spring steel headband; replaceable headband padding and ear pads, velour and black leatherette sets supplied
Works withDetachable 1.2 – 3.0 m coiled and 3.0 m straight cables with gold-plated 3.5 mm plugs; screw-on 6.3 mm adapter3 m straight cable and 5 m coiled cable (extended), detachable, with a 3-pin mini-XLR connector on one side; gold-plated 3.5 mm stereo jack with 6.35 mm adapter (the manual; beyerdynamic's product page lists a 6.35 mm jack plug)
ColoursBlack–
In the boxATH-M40x headphones, two cables, screw-on 6.3 mm adapter, pouchHeadphones, velour ear pads, black leatherette ear pads, 3 m straight cable, 5 m coiled cable, hard case

More comparisons