Canon EF 100mm f/2.8 Macro USM vs Canon EF 70–200mm f/2.8L IS III USM

Every spec side by side, from each maker's published figures.

Better figure, where one is clearly better

EF 100mm f/2.8 Macro USM compared with EF 70–200mm f/2.8L IS III USM
CanonEF 100mm f/2.8 Macro USMCanonEF 70–200mm f/2.8L IS III USM
Overview
ReleasedMarch 2000September 2018
Optics
Lens typePrimeZoom
Focal length100 mm70–200 mm
Maximum aperturef/2.8f/2.8
Minimum aperturef/32f/32
Macro lensYes–
Optical constructionTwelve elements in eight groups with three-group floating focusing23 elements in 19 groups; retains the optical layout of the EF 70–200mm f/2.8L IS II USM
Special elements–One fluorite and five UD elements
Coatings–Air Sphere Coating and revised optical coatings; fluorine coating on front and rear element surfaces
DiaphragmEight blades; Canon UK's store describes a circular apertureEight blades with a circular aperture
Angle of view24° diagonal, 20° horizontal and 14° vertical according to Canon's manualDiagonal 34°–12°; vertical 19°30′–7°; horizontal 29°–10°
Mount and compatibility
MountsCanon EFCanon EF
Image circleFull frameFull frame
CompatibilityCanon EF cameras with full-frame or APS-C sensorsCanon EF mount full-frame and APS-C cameras
Teleconverter supportCanon's manual excludes Extender EF1.4X II and EF2X IIEF1.4X III gives 98–280 mm f/4 and 0.30× maximum magnification; EF2X III gives 140–400 mm f/5.6 and 0.44×; autofocus remains available but is slower
Focus and stabilisation
AutofocusYesYes
Minimum focus distance0.31 m1.2 m
Maximum magnification1×0.21×
Optical stabilisationNoYes
Autofocus detailRing USM; full-time manual adjustment after One Shot AF while holding the shutter half-pressed according to Canon's manualRing-type USM; full-time manual override after One-Shot autofocus while holding the shutter button halfway
Focus distance detailInternal focusing keeps the length constant and the front ring stationary; focus limiter selects 0.31 m to infinity or 0.48 m to infinityInternal focusing; maximum 0.21× magnification at 200 mm
Magnification detailLife-size 1× reproduction without attachments; Canon Camera Museum gives 149 mm working distance at life-size, distinct from 0.31 m image-plane focusing distance–
Stabilisation detailNo optical stabilisation according to The Digital Picture's exact-model specification tableUp to 3.5 stops under CIPA testing at 200 mm on an EOS-1D X Mark II; Mode 1 for still subjects and Mode 2 for panning; Canon notes tripod results depend on the tripod and shooting conditions
Design
Dust and moisture resistantNoYes
Filter diameter58 mm77 mm
Maximum diameter79 mm88.8 mm
Length119 mm199 mm
Weight600 g (better)1,480 g
ControlsAF/MF switch, focus-range switch, focus ring, distance window and reproduction-ratio scaleAF/MF, IS on/off and IS mode switches; focus limiter selects 1.2 m–infinity or 2.5 m–infinity
Zoom design–Internal zooming maintains physical length (Digital Camera World)
Weather resistanceNo weather sealing according to The Digital Picture's exact-model specification tableDust- and moisture-resistant construction with a rubber gasket at the mount
Dimensions detailCanon Camera Museum gives 79 mm diameter × 119 mm length and 600 g; Canon's Japanese manual instead lists 78.6 × 118.6 mm and 580 g. Both describe the same model; no separately marketed revision is identified88.8 mm maximum diameter × 199 mm length, measured from the mount to the lens front; add 24.2 mm for front and rear caps
Weight detailHeadline weight follows Canon Camera Museum's historical specification; the manual's 580 g figure is lens-only, excluding caps and optional tripod ringApproximately 1,480 g lens only according to Canon's instruction manual, UK store and Camera Museum; a Canon USA one-page specification chart instead lists approximately 1,440 g
Tripod mountOptional Ring-type Tripod Mount B (B), with the adaptor specifically for this lens, according to Canon's manualIncluded removable rotating B (W II) tripod mount ring; detach the lens from the camera before removing the collar
Lens hoodET-67; optional according to the two reviewsET-87, with release button and reversible mounting for storage
In the box–ET-87 hood and LZ1326 lens case according to the UK store; tripod mount ring included according to Canon's instruction manual
Release detailCanon Camera Museum records March 2000 marketing and explicitly says this replaces the earlier EF 100mm f/2.8 Macro. Its predecessor year of 1991 conflicts with the original lens's own Museum table, which gives April 1990Marketed in September 2018 according to Canon Camera Museum; Canon USA's 7 June announcement had scheduled US shipping for August 2018

More comparisons