Canon RF 14mm F1.4L VCM vs Canon RF 70–200mm F2.8 L IS USM

Every spec side by side, from each maker's published figures.

Only show differences

Better figure, where one is clearly better

Share comparison

RF 14mm F1.4L VCM compared with RF 70–200mm F2.8 L IS USM

	CanonRF 14mm F1.4L VCM	CanonRF 70–200mm F2.8 L IS USM
Overview
Released
Released	February 2026	November 2019
Optics
Lens type
Lens type	Prime	Zoom
Focal length
Focal length	14 mm	70–200 mm
Maximum aperture
Maximum aperture	f/1.4	f/2.8
Minimum aperture
Minimum aperture	f/16	f/32
Optical construction
Optical construction	18 elements in 13 groups	Seventeen elements in thirteen groups
Special elements
Special elements	One fluorite, one UD, one BR and three glass-moulded aspherical elements	Three UD, one Super UD, one aspherical UD and one glass-moulded aspherical element; fluorine coatings on front and rear elements
Coatings
Coatings	Two ASC coatings, SWC and Super Spectra; fluorine coating on the front element	–
Aperture detail
Aperture detail	f/1.4–16; iris ring supports stepless aperture control in video, with stills compatibility dependent on camera model	–
Diaphragm
Diaphragm	11 circular aperture blades	Nine circular-aperture blades
Angle of view
Angle of view	104° horizontal, 81° vertical and 114° diagonal on full frame	–
Projection
Projection	Rectilinear ultra-wide design	–
Mount and compatibility
Mounts
Mounts	Canon RF	Canon RF
Image circle
Image circle	Full frame	Full frame
Compatibility
Compatibility	Canon EOS R cameras; full-frame image circle; iris-ring functions depend on the camera and firmware	Canon RF mount for full-frame and APS-C EOS R bodies; RF extenders not compatible
Teleconverter support
Teleconverter support	Canon RF extenders not compatible	–
Focus and stabilisation
Autofocus
Autofocus	Yes	Yes
Minimum focus distance
Minimum focus distance	0.24 m	0.7 m
Maximum magnification
Maximum magnification	0.11×	0.23×
Optical stabilisation
Optical stabilisation	No	Yes
Autofocus detail
Autofocus detail	Voice Coil Motor autofocus; electronic manual focus ring; maker rear-focus design maintains lens length during focusing	Dual Nano USM drives focus and floating lens groups independently; electronic floating focus system
Focus distance detail
Focus distance detail	–	Minimum focus 0.7 m
Magnification detail
Magnification detail	–	Maximum 0.23× at 200 mm
Stabilisation detail
Stabilisation detail	No lens optical IS; maker lists camera IBIS CIPA-2024 performance of 6.5 stops at the centre and 2.5 at the corners, subject to the compatible camera/test conditions	Optical IS rated five stops under CIPA; three modes for general use, panning and exposure-only stabilisation
Video features
Video features	Stepless iris ring; Canon Japan identifies EOS R1/EOS R5 Mark II stills iris-ring support; the US launch also names EOS R6 Mark III; do not assume the same support on every EOS R body	–
Design
Dust and moisture resistant
Dust and moisture resistant	Yes	Yes
Filter diameter
Filter diameter	–	77 mm
Maximum diameter
Maximum diameter	76.5 mm	89.9 mm
Length
Length	112 mm	146 mm
Weight
Weight	578 g (better)	1,070 g
Controls
Controls	Customisable control ring, electronic focus ring, iris ring with Auto-position lock, AF/MF switch and custom function button (controls confirmed by Digital Camera World)	Zoom, electronic manual-focus and customisable control rings; focus limiter with full or 2.5 m–infinity range; AF/MF, IS on/off and three IS mode switches; zoom lock at 70 mm
Zoom design
Zoom design	–	Extending barrel with 146 mm retracted length at 70 mm
Filter detail
Filter detail	No front screw-in filter thread; rear gelatin-filter holder for 36.7 × 29.4 mm filters	–
Weather resistance
Weather resistance	Dust and moisture resistant structure with mount gasket; Canon states resistance requires attachment to a camera and cannot prevent all dust or water ingress; no IP rating inferred	Dust and water resistant construction; Canon states this cannot completely prevent dust or droplets entering
Dimensions detail
Dimensions detail	Approximately 76.5 mm maximum diameter × 112 mm length; integral hood	Approximately 89.9 mm maximum diameter × 146 mm length, retracted
Weight detail
Weight detail	Approximately 578 g lens	Approximately 1,070 g lens
Tripod mount
Tripod mount	–	Removable Tripod Mount Ring E (WIII), included
Lens hood
Lens hood	Built into the lens barrel; maker lists lens cap 14B, Lens Dust Cap RF and pouch LP1219 as accessories	ET-83F (WIII) hood included, with filter-adjustment window
In the box
In the box	–	Lens, E-77 II front cap, RF dust cap, ET-83F hood, LP1424 drawstring case, Tripod Mount Ring E (WIII) and user manual
Release detail
Release detail	Canon Japan specifies first sale on 20 February 2026; US announcement expected availability by the end of February, rather than the same exact regional day	November 2019 marketed month in Canon Camera Museum