Canon RF 7-14mm F2.8-3.5L FISHEYE STM vs Canon RF 800mm F5.6L IS USM

Every spec side by side, from each maker's published figures.

Better figure, where one is clearly better

RF 7-14mm F2.8-3.5L FISHEYE STM compared with RF 800mm F5.6L IS USM
CanonRF 7-14mm F2.8-3.5L FISHEYE STMCanonRF 800mm F5.6L IS USM
Overview
ReleasedFebruary 2026May 2022
Optics
Lens typeZoomPrime
Focal length7–14 mm800 mm
Maximum aperturef/2.8–3.5f/5.6
Minimum aperturef/22–29f/64
Optical construction16 elements in 11 groupsTwenty-six elements in eighteen groups
Special elementsFive UD and two replica aspherical elementsTwo fluorite elements, one Super UD and one UD element
CoatingsThree ASC coatings and Super Spectra; fluorine coating on the front elementSuper Spectra and ASC; fluorine coating on the front element
Aperture detailf/2.8–22 at 7 mm and f/3.5–29 at 14 mm; maker minimum-aperture figures use 1/3-stop displayMaximum f/5.6; minimum f/64
DiaphragmNine aperture bladesNine circular blades
Angle of viewHorizontal 190°–149°45′, vertical 190°–99°50′ and diagonal 190°–180° on full frameFull-frame diagonal 3°05′; horizontal 2°35′; vertical 1°40′
ProjectionCircular 190° fisheye at 7 mm and frame-filling diagonal 180° fisheye at 14 mm on full frame; circular mode uses equidistant projection; neither is rectilinear–
Mount and compatibility
MountsCanon RFCanon RF
Image circleFull frameFull frame
CompatibilityCanon EOS R full-frame or APS-C cameras; APS-C cannot show the complete circular image and uses approximately 8.7 mm for diagonal coverage (Digital Camera World)Canon RF mount for full-frame and APS-C EOS R cameras
Teleconverter supportCanon RF extenders not compatibleRF 1.4× gives 1120 mm f/8 with 0.49× magnification; RF 2× gives 1600 mm f/11 with 0.71×; AF and IS operate with either extender
Focus and stabilisation
AutofocusYesYes
Minimum focus distance0.15 m (autofocus)2.6 m
Maximum magnification0.35× (autofocus)0.34×
Optical stabilisationNoYes
Autofocus detailLeadscrew-type STM focusing with position sensors; full-time manual focus; maker rear-focusing design maintains length during focusRing-type USM; electronic full-time manual focus requires compatible body settings; original EOS R, RP and Ra are unsupported, and R5/R6 require firmware 1.3.0 or later
Focus distance detailMaker specifies 0.15 m throughout the 7–14 mm range in autofocus2.6 m minimum focus; full range, 2.6–20 m and 20 m–infinity limiter settings; three manual-focus speeds and two stored focus presets
Magnification detailMaximum 0.35× at 14 mm in autofocus, measured at the image centre; do not assume identical magnification across a fisheye image0.34× maximum magnification; approximately 206 × 138 mm subject fills a full-frame image at minimum focus
Stabilisation detailNo lens optical IS; maker separately lists compatible camera IBIS at seven stops at the centre/14 mm under CIPA-2024 conditionsCanon UK and Japan rate optical IS at 4.5 stops with EOS R, R5 or R3 under CIPA yaw/pitch conditions; modes 1, 2 and 3
Video featuresCircular fisheye material can be converted to monoscopic 2D 180° VR with EOS VR Utility on supported cameras; not a stereoscopic dual-fisheye lens; conversion compatibility depends on body and recording formatAperture control in 1/8-stop increments; power-focus mode with two speeds selected by playback-ring rotation
Design
Dust and moisture resistantYesYes
Filter diameter–52 mm
Maximum diameter76.5 mm163 mm
Length109.4 mm432 mm
Weight476 g (better)3,140 g
ControlsZoom, focus and customisable control rings; AF/MF switch, function button and zoom lock/limit control (Digital Camera World)Focus and playback rings, AF/PF/MF selector, focus-speed and preset switches, and four lens-function buttons
Zoom designInternal zoom and focus retain the same physical lens length (Amateur Photographer; Digital Camera World)–
Filter detailNo front screw-in filter thread; rear Drop-in Filter A system; supplied clear filter and optional Drop-in Variable ND Filter A or Drop-in Circular Polarizing Filter A52 mm drop-in screw-type holder 52 (WIII), supplied with a clear Protect filter; compatible with optional drop-in polariser and gelatin holder
Weather resistanceDust and moisture resistant with mount gasket; Canon states attachment to a camera is needed and protection does not prevent all dust or water ingress; no waterproof/IP claimDust- and moisture-resistant construction with heat-reflective paint
Dimensions detailApproximately 76.5 mm maximum diameter × 109.4 mm length, excluding detachable hood163 mm maximum diameter × 432 mm length
Weight detailApproximately 476 g lensApproximately 3,140 g lens
Tripod mount–Supplied tripod collar and support foot
Lens hoodDetachable EW-76; remove for circular fisheye shooting to avoid the hood entering the image (Amateur Photographer; Digital Camera World)ET-155 (WIII) included; shorter ET-155B optional
In the boxDrop-in clear filter includedLens, drop-in screw-type filter holder 52 (WIII) with 52 mm Protect filter, E-180E cap, RF dust cap, ET-155 (WIII) hood, LS600 soft case, Lens Wide Strap B and user manual
Release detailCanon Japan specifies first sale on 20 February 2026; US announcement expected availability by the end of February, rather than the same exact regional dayFirst sale in Japan on 26 May 2022, stated by Canon Japan support; the original announcement promised late May

More comparisons