Nikon NIKKOR Z 14-24mm f/2.8 S vs Nikon NIKKOR Z 28-135mm f/4 PZ

Every spec side by side, from each maker's published figures.

Better figure, where one is clearly better

NIKKOR Z 14-24mm f/2.8 S compared with NIKKOR Z 28-135mm f/4 PZ
NikonNIKKOR Z 14-24mm f/2.8 SNikonNIKKOR Z 28-135mm f/4 PZ
Overview
ReleasedNovember 2020April 2025
Optics
Lens typeZoomZoom
Focal length14–24 mm28–135 mm
Maximum aperturef/2.8f/4
Minimum aperturef/22f/22
Optical constructionSixteen elements in eleven groups18 elements in 13 groups
Special elementsFour ED and three aspherical elementsThree ED elements, one aspherical ED element and four aspherical elements
CoatingsNano Crystal Coat, ARNEO coat and fluorine-coated front elementMeso Amorphous Coat and fluorine coating on the front element
Aperture detailConstant f/2.8 maximum; f/22 minimum–
DiaphragmNine rounded bladesNine rounded blades
Angle of viewFX 114°–84°; DX 90°–61°FX 75° to 18°10′; DX 53° to 12°
Mount and compatibility
MountsNikon Z mountNikon Z mount
Image circleFull frameFull frame
CompatibilityNikon Z mount; FX and DX cameras; DX gives the angle of view of a 21–36 mm zoom on full frame–
Focus and stabilisation
AutofocusYesYes
Minimum focus distance0.28 m0.34 m
Maximum magnification0.13×0.25×
Optical stabilisationNoNo
Autofocus detailStepping-motor autofocus, as Digital Camera World describes; Nikon states smooth, quiet operationStepping motor autofocus and internal focusing
Focus distance detailInternal focusing; minimum 0.28 m from focal plane at all zoom positionsMinimum focal-plane distances of 0.34 m at 28, 35 and 50 mm; 0.39 m at 70 mm; 0.43 m at 85 mm; 0.49 m at 105 mm; 0.57 m at 135 mm
Magnification detailMaximum reproduction ratio 0.13× at 24 mmMaximum reproduction ratio 0.25× at 55–135 mm
Stabilisation detailNo optical stabilisation, as Digital Camera World confirms; compatible bodies can provide sensor-shift stabilisationNo optical VR, confirmed by Digital Camera World; camera stabilisation depends on the body
Video featuresNikon describes reduced focus breathing and reduced focus shift while zooming; smooth aperture control via the control ringFocus-breathing suppression, linear manual-focus support and power zoom; Hi-Res Zoom synchronisation requires a supported camera and suitable firmware
Design
Dust and moisture resistantYesYes
Filter diameter112 mm95 mm
Maximum diameter88.5 mm105 mm
Length124.5 mm177.5 mm
Weight650 g (better)1,210 g
ControlsZoom ring, focus ring, separate programmable control ring, L-Fn button, A/M switch and DISP button; OLED shows focal length, aperture, focus distance and depth of fieldZoom rocker, electronically coupled zoom and focus rings, customisable control ring, two L-Fn buttons and A–M switch; no mechanically driven manual zoom ring
Zoom design–Internal power zoom with eleven selectable speeds on compatible cameras; adjustable zoom-ring direction and rotation angle, with firmware and camera compatibility requirements
Filter detail112 mm screw-on filters attach through supplied HB-97 specialised hood; rear slot accepts gel filters. No direct front filter thread on the bare lens95 mm screw-in filter thread; HB-116 rectangular hood has a filter adjustment window
Weather resistanceExtensive sealing around moving barrel parts and an aluminium-alloy mount, according to Nikon UKMaker dust and drip-resistant design; protection is not guaranteed in every condition
Dimensions detailApproximately 88.5 × 124.5 mm, distance to end of lens measured from camera lens mount flangeApproximately 105 mm maximum diameter × 177.5 mm from the mount flange
Weight detailApproximately 650 gApproximately 1,210 g including tripod collar, used in the main specifications; approximately 1,120 g without it
Tripod mount–Tripod collar with removable foot
Lens hoodHB-96 standard hood and HB-97 filter-support hood included–
In the boxLC-Z1424 and LC-K104 front caps, LF-N1 rear cap, HB-96 and HB-97 hoods, and CL-C2 caseLC-95B front cap, LF-N1 rear cap, HB-116 hood and CL-C5 case
Release detailNikon USA specifies November 2020 availability; month precision retainedNikon USA specified April 2025 retail availability; the February announcement date is not used as the on-sale date

More comparisons