Beurer BM 25 vs Microlife BP 3AS1-2

Every spec side by side, from each maker's published figures.

Only show differences

Better figure, where one is clearly better

Share comparison

BM 25 compared with BP 3AS1-2

	BeurerBM 25	MicrolifeBP 3AS1-2
Overview
Released
Released	–	–
Measuring
Type
Type	Upper arm	Upper arm
Clinically validated
Clinically validated	–	Yes
Irregular heartbeat detection
Irregular heartbeat detection	Yes	No
AFib detection or ECG
AFib detection or ECG	–	No
Method
Method	Automatic oscillometric upper-arm measurement during deflation; first on-sale date not established	Semi-automatic oscillometric upper-arm measurement with capacitive pressure sensor. Hand inflation using pump integrated into handle; automatic deflation and digital pressure/pulse results. O/I button interrupts measurement and releases cuff pressure. Actual first retail date unresolved
Accuracy
Accuracy	Maker manual specifies display accuracy of ±3 mmHg for systolic and diastolic pressure and ±5% of the displayed pulse value; this specification is distinct from clinical validation	February 2024 exact guide gives systolic/diastolic range 20–280 mmHg, pulse 40–200 bpm, 1 mmHg pressure resolution, static pressure accuracy ±3 mmHg and pulse accuracy ±5% of reading
Clinical validation
Clinical validation	Beurer states clinical testing to ISO 81060-2 in the manual; exact independent registry confirmation was not established	Nathan and colleagues, Blood Pressure Monitoring 2015, tested exact Microlife 3AS1-2 in 45 pregnant women including 15 with pre-eclampsia. Overall B/A grade under the British Hypertension Society protocol and passed the study's ISO mean-difference standard; pregnancy-only subgroup A/A. These are study-specific findings, not evidence for every population named in generic maker text
Features
Features	Single start/stop button, cuff fit check, irregular heartbeat warning, classification scale and automatic switch-off; maker lists no resting indicator or calculated averages	Manual inflation, automatic measurement/deflation, low-battery and inflation indicators. Flashing heart indicates detected pulse, not irregular-heartbeat screening. No AFib detection, ECG or automatic triple-measurement mode
Cuff
Cuff fits
Cuff fits	22–42 cm	22–32 cm
Cuff
Cuff	Supplied upper-arm cuff	Supplied M 22–32 cm cuff; optional L 32–42 cm. Single-tube cuff with T-connector attaches at the back of the device
Connections and memory
Users
Users	–	1
Readings stored
Readings stored	–	1
Bluetooth and app
Bluetooth and app	No	No
Memory
Memory	–	One latest measurement retained until the next measurement or battery removal. Hold O/I for at least three seconds to recall. No dated history, user selector or averaging
App
App	Scan & Save in beurer HealthManager Pro uses a smartphone camera to record the display; no Bluetooth connection	No Bluetooth, USB or phone-app transfer
Power
Power	Four 1.5 V LR03 AAA batteries or optional DC 5 V, 1 A mains adaptor through USB-C; USB-C is for mains operation, not charging the disposable batteries	Two 1.5 V AAA alkaline cells; approximately 780 measurements using new batteries. Current guide does not recommend 1.2 V rechargeable cells. Generic guarantee wording about an optional adaptor does not establish a mains socket or mains operation
Design
Display details
Display details	Non-illuminated LCD, 4.4 × 5.3 cm, with black digits; maker lists no date/time display	LCD showing systolic, diastolic and pulse readings; single O/I button. IP20
Size
Size	12.00 × 9.00 × 4.00 cm (L × W × H)	68 × 186 × 48.5 mm (width × length × height); 310 g including batteries, excluding cuff in global support table
In the box
In the box	Monitor, 22–42 cm cuff and four AAA batteries	Exact guide establishes monitor with integrated pump and M 22–32 cm cuff; complete regional accessory list unresolved