beyerdynamic DT 1990 PRO vs Sennheiser HD 599

Every spec side by side, from each maker's published figures.

Better figure, where one is clearly better

DT 1990 PRO compared with HD 599
beyerdynamicDT 1990 PROSennheiserHD 599
Overview
ReleasedSeptember 2016September 2016
Sound
TypeOver-earOver-ear
Noise cancellingNoNo
Driver size45 mm38 mm
BackOpenOpen
Impedance250 ohms50 ohms
Bluetooth codecsNone (wired)None (wired)
Drivers45 mm Tesla dynamic drivers, open; 5 – 40,000 Hz; 102 dB SPL (1 mW, 500 Hz); max. 125 dB SPL (200 mW, 500 Hz); THD < 0.05% (1 mW, 500 Hz); rated power handling 200 mW38 mm dynamic transducers, open, with Ergonomic Acoustic Refinement (E.A.R.) design that channels sound directly into the ears; 12 – 38,500 Hz; 106 dB SPL (1 kHz, 1 Vrms); THD < 0.1% (1 kHz, 100 dB SPL)
Battery
Listening time (maker's claim)No battery (wired)No battery (wired)
Design
Weight370 g250 g (better)
Headphone cableYesYes
Fit and ear tipsCircumaural, open-back; nominal contact pressure approx. 6.6 N; replaceable headband padding and ear pads, two sets supplied ("analytical" for a neutral sound, "balanced" with slightly more bass)Over-ear, open-back; large ear cups with soft replaceable ear pads
Works with3 m straight cable and 5 m coiled cable (extended), detachable, with a 3-pin mini-XLR connector on one side; gold-plated 3.5 mm stereo jack with 6.35 mm adapter (the manual; beyerdynamic's product page lists a 6.35 mm jack plug)Detachable cables, 3 m with 6.3 mm straight plug and 1.2 m with 3.5 mm straight plug; 6.3 mm to 3.5 mm adapter
Colours–Ivory
In the boxHeadphones, two sets of ear pads, 3 m straight cable, 5 m coiled cable, hard caseHD 599 headphones, 3 m cable with 6.3 mm straight plug, 1.2 m cable with 3.5 mm straight plug, 6.3 mm to 3.5 mm adapter

More comparisons