beyerdynamic DT 1990 PRO vs Sennheiser HD 800 S

Every spec side by side, from each maker's published figures.

Better figure, where one is clearly better

DT 1990 PRO compared with HD 800 S
beyerdynamicDT 1990 PROSennheiserHD 800 S
Overview
ReleasedSeptember 2016January 2016
Sound
TypeOver-earOver-ear
Noise cancellingNoNo
Driver size45 mm56 mm
BackOpenOpen
Impedance250 ohms300 ohms
Bluetooth codecsNone (wired)None (wired)
Drivers45 mm Tesla dynamic drivers, open; 5 – 40,000 Hz; 102 dB SPL (1 mW, 500 Hz); max. 125 dB SPL (200 mW, 500 Hz); THD < 0.05% (1 mW, 500 Hz); rated power handling 200 mW56 mm Ring Radiator dynamic transducer with 40 mm voice coil and acoustic absorber; 10 – 44,100 Hz (–3 dB), 4 – 51,000 Hz (–10 dB); 102 dB SPL at 1 kHz (1 Vrms); THD ≤ 0.02% (1 kHz, 1 Vrms); diffuse-field equalised; max. 500 mW long-term input power
Battery
Listening time (maker's claim)No battery (wired)No battery (wired)
Design
Weight370 g330 g (better)
Headphone cableYesYes
Fit and ear tipsCircumaural, open-back; nominal contact pressure approx. 6.6 N; replaceable headband padding and ear pads, two sets supplied ("analytical" for a neutral sound, "balanced" with slightly more bass)Over-ear (circumaural), open-back; contact pressure approx. 3.4 N; microfibre ear and headband padding; metal headband and dual-axis earcups
Works with3 m straight cable and 5 m coiled cable (extended), detachable, with a 3-pin mini-XLR connector on one side; gold-plated 3.5 mm stereo jack with 6.35 mm adapter (the manual; beyerdynamic's product page lists a 6.35 mm jack plug)3 m silver-plated OFC cables, para-aramid reinforced, with 6.35 mm unbalanced or 4.4 mm balanced plugs
In the boxHeadphones, two sets of ear pads, 3 m straight cable, 5 m coiled cable, hard caseHD 800 S headphones, cable with 6.35 mm plug, cable with balanced 4.4 mm plug, instruction manual, storage box

More comparisons