Canon EF 70–200mm f/2.8L IS III USM vs Canon EF-S 60mm f/2.8 Macro USM

Every spec side by side, from each maker's published figures.

Better figure, where one is clearly better

EF 70–200mm f/2.8L IS III USM compared with EF-S 60mm f/2.8 Macro USM
CanonEF 70–200mm f/2.8L IS III USMCanonEF-S 60mm f/2.8 Macro USM
Overview
ReleasedSeptember 2018March 2005
Optics
Lens typeZoomPrime
Focal length70–200 mm60 mm
Maximum aperturef/2.8f/2.8
Minimum aperturef/32f/32
Optical construction23 elements in 19 groups; retains the optical layout of the EF 70–200mm f/2.8L IS II USM12 elements in eight groups; three-group floating internal-focus system
Special elementsOne fluorite and five UD elements–
CoatingsAir Sphere Coating and revised optical coatings; fluorine coating on front and rear element surfacesCanon describes optimised coatings to reduce flare and ghosting from sensor reflections
Aperture detail–Camera-displayed aperture assumes infinity focus; effective maximum aperture becomes f/5.84 at life-size magnification according to Canon's manual
DiaphragmEight blades with a circular apertureSeven blades according to Canon Camera Museum and Canon Japan
Angle of viewDiagonal 34°–12°; vertical 19°30′–7°; horizontal 29°–10°Horizontal 20°40′, vertical 14°10′, diagonal 24°30′
Mount and compatibility
MountsCanon EFCanon EF-S
Image circleFull frameAPS-C
CompatibilityCanon EF mount full-frame and APS-C camerasCanon EF-S compatible APS-C cameras; equivalent angle of view to 96 mm on full frame
Teleconverter supportEF1.4X III gives 98–280 mm f/4 and 0.30× maximum magnification; EF2X III gives 140–400 mm f/5.6 and 0.44×; autofocus remains available but is slowerCanon EF1.4X II and EF2X II extenders cannot be used
Focus and stabilisation
AutofocusYesYes
Minimum focus distance1.2 m0.2 m
Maximum magnification0.21×1×
Optical stabilisationYesNo
Autofocus detailRing-type USM; full-time manual override after One-Shot autofocus while holding the shutter button halfwayUSM autofocus; full-time manual focusing after One-Shot AF with the shutter button held halfway
Focus distance detailInternal focusing; maximum 0.21× magnification at 200 mm0.2 m minimum focus measured from the focal plane; approximately 90 mm working distance from the lens front at life-size magnification
Magnification detail–EF12 II extension tube gives 0.20–1.28×; EF25 II gives 0.44–1.61×. Optional 250D close-up lens gives 0.25–1.33× and 500D gives 0.12–1.18×
Stabilisation detailUp to 3.5 stops under CIPA testing at 200 mm on an EOS-1D X Mark II; Mode 1 for still subjects and Mode 2 for panning; Canon notes tripod results depend on the tripod and shooting conditionsNo optical stabilisation according to The Digital Picture's exact-model specifications
Design
Dust and moisture resistantYesNo
Filter diameter77 mm52 mm
Maximum diameter88.8 mm73 mm
Length199 mm69.8 mm
Weight1,480 g335 g (better)
ControlsAF/MF, IS on/off and IS mode switches; focus limiter selects 1.2 m–infinity or 2.5 m–infinityAF/MF switch; distance window with magnification scale
Filter detail–Front filter thread accommodates a filter and compatible macro flash together; front element does not rotate during focusing according to Photozone and The Digital Picture
Zoom designInternal zooming maintains physical length (Digital Camera World)–
Weather resistanceDust- and moisture-resistant construction with a rubber gasket at the mountCanon Japan lists no dust or drip resistance
Dimensions detail88.8 mm maximum diameter × 199 mm length, measured from the mount to the lens front; add 24.2 mm for front and rear caps73 mm maximum diameter × 69.8 mm from mount surface to lens front; cap and rear cap excluded
Weight detailApproximately 1,480 g lens only according to Canon's instruction manual, UK store and Camera Museum; a Canon USA one-page specification chart instead lists approximately 1,440 gCanon's manual specifies 335 g for the lens alone
Tripod mountIncluded removable rotating B (W II) tripod mount ring; detach the lens from the camera before removing the collar–
Lens hoodET-87, with release button and reversible mounting for storageET-67B hood and LP1016 case sold separately according to Canon's manual; Canon Japan's later accessory listing includes hood and case without clarifying regional package differences
In the boxET-87 hood and LZ1326 lens case according to the UK store; tripod mount ring included according to Canon's instruction manual–
Release detailMarketed in September 2018 according to Canon Camera Museum; Canon USA's 7 June announcement had scheduled US shipping for August 2018Canon Camera Museum records March 2005 marketing. Canon Japan's February announcement planned 17 March, while its later exact-model support sheet records 19 March 2005 as the Japanese release date. The headline retains month precision; no UK first-sale day is established.

More comparisons