Dyson R2 Nurovi Wash+Dry vs eufy Omni C28
Better figure, where one is clearly better
| DysonR2 Nurovi Wash+Dry | eufyOmni C28 | |
|---|---|---|
| Overview | ||
| Released | – | – |
| Task and control | ||
| Form | Robot vacuum | Robot vacuum |
| Use | Floor cleaning | Floor cleaning |
| Phone app | Yes | Yes |
| Autonomy | – | Carry the robot between floors. Without its dock, a low fresh-water or full dirty-water tank switches the task to vacuuming; return it for self-cleaning afterwards. |
| Intended use | Vacuuming hard floors and carpet, with washable triangular pads for hard-floor washing. | – |
| Remote control | MyDyson app supports map editing, no-go zones, cleaning schedules, room order, Do Not Disturb and notifications. | eufy app supports maps and cleaning settings; onboard controls also available. Maker provides model-specific Wi-Fi setup instructions. |
| Regional availability | Exact UK Light grey/Vinca blue SKU 664879-01 had an active In stock purchase block and basket button on 3 October 2026. | UK black T211A210 and white T211A220 maker SKUs are orderable; cosmetic colours and accessory bundles do not create different robot models. |
| Release details | Maker announcement dated 3 September 2026 says launching soon; actual first-sale date remains unconfirmed after bounded source search. | Maker identifies C28 as a 2026 release. Contemporary regional reports differ on the February first-sale period; an exact worldwide retail date is not established here. |
| Hardware | ||
| Wi-Fi | – | Yes |
| Height | 96 mm | – |
| Width | 352 mm | – |
| Depth | 352 mm | – |
| Robot weight | 3.6 kg | – |
| Sensors | LiDAR, line lasers and edge sensors support navigation; ultrasonic floor detection distinguishes surfaces. Piezo dust sensing changes suction in Auto mode only. | – |
| Connections | Maker app footnote requires a compatible phone, Bluetooth 4.0 and either 2.4 GHz or 5 GHz Wi-Fi or mobile data. These phone requirements do not establish the robot's radio specification. | – |
| Size and weight | Robot 96 mm high, 352 mm wide and 352 mm long; maker robot weight 3.6 kg. Dock dimensions are listed separately. | – |
| Battery | ||
| Battery life (maker's claim) | Up to 90 minutes | – |
| Automatic dock return | Yes | – |
| Charging | Maker charging time 6.5 hours; automatic return to the charging dock. | Robot returns to the base station after cleaning; maker support documents the return-to-base routine. |
| Runtime conditions | Maker maximum 90 minutes; the exact mode and floor conditions are not published beside the claim. | Exact robot runtime and capacity were not published in the store/support pages used here; figures from another Omni model are not transferred. |
| Dock | Bagless self-emptying charging dock with eight cyclones; it refills the robot, washes pads and dries them. Dock is 517 mm high, 467.5 mm long and 415 mm wide, with maker dock weight 9.2 kg. | Five automatic tasks: dust emptying, mop washing, water refilling, warm-air drying and wastewater collection. |
| Cleaning | ||
| Suction (maker's claim) | 21,000 Pa | 15,000 Pa |
| Mopping | Yes | Yes |
| Automatic emptying | Yes | Yes |
| Automatic mop washing | Yes | Yes |
| Navigation | LiDAR maps rooms; line lasers detect obstacles and edge sensors support wall following. | iPath 2.0 uses LDS and linear lasers for mapping and obstacle avoidance; up to five saved maps. |
| Cleaning | Twin-capture system combines a brush bar for larger debris with suction for fine particles. Anti-tangle brush bar and side sweeper collect hair; side sweeper extends 27 mm. | DuoSpiral brushes automatically detangle hair. Suction pressure is the maker rating, not a universal cleaning-performance score. |
| Mopping | Reuleaux triangle pads rotate to reach edges and corners. Dock heats water to 75 degrees Celsius for pad washing after cleaning, then dries pads with 45-degree hot air; these dock temperatures are not an on-floor water-temperature claim. | HydroJet roller cleans itself while mopping; maker rates downward load at 1 kg. |
| Maintenance | – | Maker drying guide specifies 35–50°C warm air; Quick drying 3.5 hours for very dry areas, Standard 5 hours for humid environments. |
| Suction conditions | Maker 21000 Pa in Powerful mode; not an independently measured result. Piezo automatic boost operates in Auto mode. | – |
| Dust capacity | Maker labels a 2.6 litre bin without identifying the robot or dock assembly. Dock storage claim is up to 90 days based on internal tests; cleaning frequency, debris and floors affect the period. | – |
| Obstacle clearance | Maker claims climbing raised areas up to 40 mm. The page does not distinguish a single threshold from a staged obstacle. | – |
More comparisons
- eufy Omni C28 vs eufy Omni E28
- ECOVACS DEEBOT T50 PRO OMNI GEN3 vs eufy Omni C28
- ECOVACS DEEBOT T90 PRO OMNI vs eufy Omni C28
- ECOVACS DEEBOT X11 OmniCyclone vs eufy Omni C28
- ECOVACS DEEBOT X12 OmniCyclone vs eufy Omni C28
- DJI ROMO vs eufy Omni C28
- DJI ROMO 2 vs eufy Omni C28
- Dreame X50 Ultra vs eufy Omni C28
- Dyson R1 Nurovi Dry vs eufy Omni C28
- DJI ROMO 2 vs Dyson R2 Nurovi Wash+Dry
- Dyson R2 Nurovi Wash+Dry vs ECOVACS DEEBOT T50 PRO OMNI GEN3
- eufy Omni C28 vs Roborock Saros 20 Neo
- Dreame X60 Max Ultra Complete vs eufy Omni C28
- Dreame X60 Pro Ultra Complete vs eufy Omni C28

