Sony INZONE M10S II vs Sony INZONE M3

Every spec side by side, from each maker's published figures.

Only show differences

Better figure, where one is clearly better

Share comparison

INZONE M10S II compared with INZONE M3

	SonyINZONE M10S II	SonyINZONE M3
Overview
Released
Released	May 2026	December 2022
Display
Screen size
Screen size	27″	27″
Resolution
Resolution	2560 × 1440 (QHD) (better)	1920 × 1080 (Full HD)
Sharpness
Sharpness	109 pixels per inch (better)	82 pixels per inch
Panel
Panel	OLED (4th-gen Primary RGB Tandem WOLED; Dual mode: 720p at 720 Hz)	IPS (Edge-lit LED backlight without local dimming)
Refresh rate
Refresh rate	540 Hz (better)	240 Hz
Response time (grey to grey)
Response time (grey to grey)	0.02 ms (better)	1 ms
Brightness (typical)
Brightness (typical)	335 nits	400 nits (better)
HDR peak brightness
HDR peak brightness	1,500 nits (better)	400 nits
HDR certification
HDR certification	–	DisplayHDR 400
HDR formats
HDR formats	HDR10, HLG	HDR10, HLG
Contrast ratio
Contrast ratio	1,500,000:1	1,000:1
Colour range
Colour range	99.5% DCI-P3	99% sRGB
DCI-P3 coverage
DCI-P3 coverage	99.5%	–
Screen finish
Screen finish	Matte	Matte
Shape
Shape	Flat	Flat
Adaptive sync
Adaptive sync	G-Sync Compatible, HDMI VRR	VESA AdaptiveSync, G-Sync Compatible, HDMI VRR
Colour depth
Colour depth	1.07 billion colours	1.07 billion colours
Colour modes
Colour modes	SDR: FPS Pro+, FPS Pro, MOBA/RTS, Cinema, Game, Custom, Standard, sRGB; HDR: Standard, Cinema, Game, Custom, RPG	Standard, FPS Game, Cinema, Game 1 and Game 2; black equalizer, crosshair, timer and frame-rate counter
HDR detail
HDR detail	1,500 cd/m² peak measured on a 3% window	VESA DisplayHDR 400; edge-lit backlight without local dimming. Typical and peak brightness 400 cd/m²; static and dynamic contrast 1,000:1.
Response time detail
Response time detail	–	1 ms grey-to-grey in Faster mode (Sony UK specifications); the Japanese table calls this Fast mode. These mode labels differ between regional tables.
Motion blur reduction
Motion blur reduction	Motion Blur Reduction (MBR), which raises brightness during the lit interval	No backlight strobing (Sony FAQ)
Viewing angles
Viewing angles	178° / 178°	178° horizontal and vertical
Eye care
Eye care	TÜV Rheinland-certified low blue light and flicker reduction; VRR anti-flicker	TÜV Rheinland-certified low blue light and flicker-free display
Calibration
Calibration	–	Sony states Delta E below 1 for HDR input in its shared original M9/M3 FAQ; a factory colour-calibration report is supplied. This is not an SDR accuracy claim.
Burn-in protection
Burn-in protection	Custom heat sinks for heat management	–
Connections
Video inputs
Video inputs	2 × HDMI 2.1, DisplayPort 2.1 UHBR13.5	2 × HDMI 2.1, DisplayPort 1.4, USB-C
USB-C charging
USB-C charging	None	Up to 15 W (better)
USB ports
USB ports	2 × USB-A	3 × USB-A
KVM switch
KVM switch	No	Yes
Ethernet
Ethernet	No	No
Speakers
Speakers	No	Yes
HDMI detail
HDMI detail	2 × HDMI 2.1, 24–480 Hz, VRR	2 × HDMI 2.1; Full HD at up to 240 Hz, HDMI VRR, ALLM, CEC and HDCP 2.3. Supported vertical frequencies 24–240 Hz. PS5 Auto HDR Tone Mapping and Auto Genre Picture Mode require supported PS5 software and settings.
DisplayPort detail
DisplayPort detail	1 × DisplayPort 2.1 (UHBR13.5), 24–540 Hz; 720 Hz at 720p in Dual Mode (Dynamic Frequency & Resolution)	1 × DisplayPort 1.4; Full HD at up to 240 Hz, VESA AdaptiveSync and NVIDIA G-SYNC Compatible. Supported vertical frequencies 24–240 Hz.
USB-C detail
USB-C detail	–	DisplayPort Alternate Mode and USB upstream; USB data transfer up to 480 Mbps (USB 2.0). Power output 5 V / 3 A, equivalent to 15 W (Sony FAQ).
USB hub detail
USB hub detail	1 × USB-B upstream, 2 × USB-A downstream, 1 × USB-A for firmware updates	1 × USB-B upstream (USB 3.0, 5 Gbps), 3 × USB-A downstream (5 V / 0.9 A each). Auto KVM switches peripherals between USB-B and USB-C upstream connections; both computers need their corresponding USB upstream connections as well as video.
Audio out
Audio out	3.5 mm headphone jack	3.5 mm headphone jack
Speaker detail
Speaker detail	–	2 W × 2
Design
Stand adjusts
Stand adjusts	Height, tilt, swivel (better)	Height, tilt
VESA mount
VESA mount	Yes	Yes
Weight with stand
Weight with stand	6.2 kg	6.2 kg
Height adjustment
Height adjustment	120 mm	70 mm
Tilt
Tilt	-5° to 35°	0° to 20°
Swivel
Swivel	±180°	No swivel
Pivot
Pivot	–	No portrait pivot
VESA pattern
VESA pattern	100 × 100 mm	100 × 100 mm
Size with stand
Size with stand	604 × 504 × 197 mm (W × H × D, approx.)	Approximately 615 × 479 × 248 mm (W × H × D)
Size without stand
Size without stand	604 × 350 × 58 mm (W × H × D, approx.)	Approximately 615 × 363 × 73 mm (W × H × D)
Weight without stand
Weight without stand	4.2 kg (approx.)	Approximately 4.1 kg
Weight detail
Weight detail	–	Approximately 6.2 kg including the stand
Controls
Controls	–	Rear five-way joystick; no rear RGB lighting
Colours
Colours	–	White rear housing and black bezel
Power and support
Power use
Power use	120 W	Typical 103 W; Eco mode 21.6 W; standby 0.5 W (Sony UK specifications)
Power supply
Power supply	–	External AC adapter; 100–240 V AC, 50/60 Hz
Laptop charging
Laptop charging	–	USB supply depends on USB-hub/KVM selection; the Help Guide says USB-B and USB-C upstream connections are required.
Software
Software	INZONE Hub (PC)	INZONE Hub for Windows; current version 1.0.19.0 lists Windows 11 Home/Pro. Older launch pages describe Windows 10 support. Firmware updates use a USB upstream connection and video connection.
In the box
In the box	–	AC adapter, AC power cord, DisplayPort cable, setup guide, operating instructions, factory colour-calibration report, warranty card and INZONE sticker (exact M3 specifications). The shared M9/M3 FAQ says cables are not supplied, conflicting with the exact M3 list.
Warranty
Warranty	3 years	–