AMD Radeon RX 580 vs NVIDIA GeForce GTX 1050 Ti

Every spec side by side, from each maker's published figures.

Better figure, where one is clearly better

Radeon RX 580 compared with GeForce GTX 1050 Ti
AMDRadeon RX 580NVIDIAGeForce GTX 1050 Ti
Overview
ReleasedApril 2017October 2016
Performance
Chip makerAMDNVIDIA
ArchitectureGCN 4Pascal
Shader cores2,304 or 2,048768
Boost clock1,340 MHz or –1,392 MHz
ArchitectureAMD original 8 GB reference baseline uses fourth-generation GCN (Polaris), 36 compute units, 32 ROPs and 144 texture units. Photo shows MSI's factory-overclocked ARMOR 8G OC, not a reference card. Later 2048SP configurations below identify specific Chinese-market Sapphire boards.Stock-clock GPU figures from MSI's GeForce GTX 1050 Ti 4G datasheet, whose card is pictured. First sale on 25 October 2016 is confirmed by GamersNexus launch coverage; the original NVIDIA launch page could not be read.
Manufacturing process14 nm–
Ray tracingNo hardware ray acceleratorsNo hardware RT Cores
AI cores–No Tensor Cores
Upscaling and frame generation–No NVIDIA DLSS support
Base clockOriginal AMD baseline is 1,257 MHz base and 1,340 MHz boost. Pictured MSI ARMOR 8G OC boosts to 1,366 MHz. Sapphire's 2048SP pages state core frequencies of 1,306 MHz (4 GB) and 1,284 MHz (8 GB V2) without a boost label, so numeric boost is omitted for those configurations.1,290 MHz for the stock specification; PNY's separate OC model is 1,366 MHz base and 1,480 MHz boost
Memory
Video memory8 GB GDDR5 or 4 GB GDDR54 GB GDDR5
Memory bus256-bit (better)128-bit
Memory bandwidth256 GB/s or ––
Memory detailOriginal stock Sapphire Pulse 8 GB SKU 11265-06 has 8,000 MHz effective memory; original stock 4 GB SKU 11265-10 and the named 2048SP boards have 7,000 MHz. AMD publishes 256 GB/s only for the 8 GB baseline; bandwidth is omitted for the others. Sapphire's original 4 GB power is only stated as less than 225 W, so its numeric power remains unpublished.MSI specifies 7,008 MHz effective GDDR5; no unambiguous maker bandwidth figure was established
Connections and power
Board power185 W, – or 150 W75 W
InterfacePCIe 3.0PCIe 3.0
Display outputsPictured MSI ARMOR has 2 × DisplayPort, 2 × HDMI and dual-link DVI-D. Sapphire 2048SP 4 GB SKU 11265-65-18 has DVI-D only; 8 GB Pulse V2 SKU 11265-70-48 has one HDMI 2.0b, one DisplayPort 1.4 and DVI-D. AMD's reference feature table lists DVI as No; partner outputs vary.Pictured MSI 4G has DisplayPort 1.4a, HDMI 2.0b and dual-link DVI-D; up to three displays
Maximum resolutionMSI ARMOR specifies 7680 × 4320 and five displays; Sapphire's named 2048SP 4 GB board is limited to 1920 × 1200 at 60 Hz over DVI-D. Its 8 GB V2 board lists DisplayPort 5120 × 2880 at 60 Hz and HDMI 4096 × 2160 at 60 Hz.7680 × 4320 on MSI's stock-card specification
Power connectorOne 8-pin on the pictured MSI ARMOR, original Sapphire Pulse and both named 2048SP boardsPNY's stock-clock model takes PCIe slot power; its separate OC model requires one 6-pin. Check the selected partner design.
Recommended power supplyAMD and MSI specify 500 W for the original model; Sapphire specifies 500 W for original Pulse and 450 W for the named 2048SP boards300 W on MSI's specification; requirements depend on the system
Slot widthOriginal Sapphire Pulse and named 2048SP designs occupy two slots; pictured MSI ARMOR is 38 mm thickPartner designs vary; PNY lists its stock-clock card as dual-slot
Size (reference card)Pictured MSI ARMOR is 269 × 125 × 38 mm and 653 g. Original Sapphire Pulse is 230 × 125 × 40 mm; named 2048SP 4 GB is 241 × 120 × 42 mm and 8 GB V2 is 212 × 111 × 40 mm.No retail Founders Edition; pictured MSI 4G is 177 × 118 × 34 mm and 330 g
Video encode and decodeAMD publishes H.264 and H.265/HEVC encoding and decoding; Sapphire specifies PCIe 3.0 for the named variantsMSI specifies PCIe 3.0 x16 and HDCP 2.2

More comparisons